FRP Bends

The FRP bends from Tunetanken are used for wastewater, rainwater, process water, air etc. FRP bends are also suitable for buried installation.

Tunetanken carries a large standard program of FRP bends. Bends are available in different sizes. All sizes are also produced with different degrees of bending (11 °, 15 °, 22.5 °, 30 °, 45 °, 60 °, 90 °).

The FRP bends from Tunetanken are manufactured in fiber-reinforced composite material, an extremely robust and corrosion-free material that does not corrode.

Contact sales
Send us an email at salg@tunetanken.dk

  • Low weight and long life-cycle.
  • Easy installation.
  • Corrosion resistant.

Tunetanken produces FRP bends in the following degrees:

  • FRP bends with 11 °.
  • FRP bends by 15 °.
  • FRP bends with 22.5 °.
  • FRP bends by 30 °.
  • FRP bends with 45 °.
  • FRP bends with 60 °.
  • FRP bends with 90 °.

Specifikationer

DiameterStrength classMaterial
350 mmSN10000FRP
400 mmSN10000FRP
450 mmSN10000FRP
500 mmSN10000FRP
550 mmSN10000FRP
600 mmSN10000FRP
650 mmSN10000FRP
700 mmSN10000FRP
750 mmSN10000FRP
800 mmSN10000FRP
850 mmSN10000FRP
900 mmSN10000FRP
950 mmSN10000FRP
1000 mmSN10000FRP
1100 mmSN10000FRP
1200 mmSN10000FRP
1280 mmSN10000FRP
1300 mmSN10000FRP
1400 mmSN10000FRP
1500 mmSN10000FRP
1535 mmSN10000FRP
1600 mmSN10000FRP
1700 mmSN10000FRP
1800 mmSN10000FRP
1900 mmSN10000FRP
2000 mmSN10000FRP
2100 mmSN10000FRP
2200 mmSN10000FRP
2300 mmSN10000FRP
2400 mmSN10000FRP
2500 mmSN10000FRP
3000 mmSN10000FRP
3300 mmSN10000FRP
3600 mmSN10000FRP
150/168 mmSN10000FRP
200/220 mmSN10000FRP
250/272 mmSN10000FRP
300/324 mmSN10000FRP

Scroll to Top